TFT
更新时间:2017-08-08 阅读:12747
TFT -- ST7735S
Fireduino TFT 采用与传统的Arduino TFT 同属一系列的LCD 驱动器,为ST7735S,与Fireduino 通过I8080 接口连接,比传统Arduino TFT 的SPI 方式 刷新速率快一个级别。
Fireduino -- TFT
Fireduino TFT 库 基于ST7735S 驱动扩展 Adafruit GFX 而成的TFT库,Adafruit GFX负责绘制图形,ST7735S 负责驱动LCD 显示屏,它兼容 Adafruit GFX API,Fireduino 连接 TFT 后如下图:
Fireduino TFT API
TFT()
说明
创建 TFT 对象
语法 TFT TFTscreen = TFT();
参数 无
返回 TFT 对象
begin()
说明 初始化 TFT,在使用TFT前必须调用以初始化TFT。
语法 TFTscreen.begin();
参数 无
返回 无
setRotation(...)
说明 设置屏幕方向。
语法 TFTscreen.setRotation(rota);
参数 rota:屏幕方向(0~3)
返回 无
backlight(...)
说明 设置屏幕背光亮度。
语法 TFTscreen.backlight(light);
参数 light:屏幕背光亮度(0~100)
返回 无
Adafruit GFX API
background(...)
说明 设置背景色。
语法 TFTscreen.background(red, green, blue);
参数 red : int 0-255 green : int 0-255 blue : int 0-255
返回 无
stroke(...)
说明 设置绘制对象画笔的颜色,在绘制对象前调用。
语法 TFTscreen.stroke(red, green, blue); TFTscreen.stroke( color);
参数 red : int 0-255 green : int 0-255 blue : int 0-255 color: 颜色对象
返回 无
fill(...)
说明 设置填充对象的颜色,通常用在对一个封闭区域着色之前调用。
语法 TFTscreen.fill(red, green, blue); TFTscreen.fill( color);
参数 red : int 0-255 green : int 0-255 blue : int 0-255 color: 颜色对象
返回 无
noFill()
noStroke()
说明 这2个函数分别是设定没有填充色以及没有线条的颜色,如果同时设定这2个去做图那么图形上不会有任何显示。
语法 TFTscreen.noFill();
TFTscreen.noStroke();
参数 无
返回 无
text(...)
说明 在指定的坐标绘制文本字符。
语法 TFTscreen.text("Sensor Value :\n ",x , y);
参数 text:需要绘制的文本 x:x轴坐标 y:y轴坐标
返回 无
setTextSize(...)
说明 设置字体大小。
语法 TFTscreen.setTextSize(size);
参数 size:字体大小
返回 无
point(...)
说明 设置一个点。
语法 TFTscreen..point(xPos, yPos);
参数 xPos :水平坐标 yPos :垂直坐标
返回 无
line(...)
说明 在两点之间绘制一条直线。
语法 TFTscreen.line(xStart, yStart, xEnd, yEnd);
参数 xStart :开始点的水平坐标 yStart :开始点的垂直坐标 xEnd :结束点的水平坐标 yEnd :结束点的垂直坐标
返回 无
rect(...)
说明 绘制一个矩形。
语法 TFTscreen.rect(xStart, yStart, width, height);
参数 xStart :开始点水平坐标 yStart :开始点的垂直坐标 width :矩形的宽度 height :矩形的高度
返回 无
circle(...)
说明 绘制一个圆。
语法 TFTscreen.circle(xPos, yPos, radius);
参数 xPos :圆心所在的水平位置 yPos :圆心说在的垂直位置 radius : 园的半径
返回 无
width()
说明 返回TFT的宽度(以像素为单位)
语法 TFTscreen.width();
参数 无
返回 屏幕的宽度
height()
说明 返回TFT的高度(以像素为单位)
语法 TFTscreen.height();
参数 无
返回 屏幕的高度
TFT 示例程序
#include <TFT.h> // Arduino LCD library // create an instance of the library TFT TFTscreen = TFT(); // char array to print to the screen char sensorPrintout[4]; void setup() { // Put this line at the beginning of every sketch that uses the GLCD: delay(1); TFTscreen.begin(); delay(1); // clear the screen with a black background TFTscreen.background(0, 0, 0); // write the static text to the screen // set the font color to white TFTscreen.stroke(255, 255, 255); // set the font size TFTscreen.setTextSize(2); // write the text to the top left corner of the screen TFTscreen.text("Sensor Value :\n ", 0, 0); // ste the font size very large for the loop TFTscreen.setTextSize(5); } void loop() { // Read the value of the sensor on A0 String sensorVal = String(analogRead(A0)); // convert the reading to a char array sensorVal.toCharArray(sensorPrintout, 4); // set the font color TFTscreen.stroke(255, 255, 255); // print the sensor value TFTscreen.text(sensorPrintout, 0, 20); // wait for a moment delay(250); // erase the text you just wrote TFTscreen.stroke(0, 0, 0); TFTscreen.text(sensorPrintout, 0, 20); }